The air conditioning filter is important in preventing the build up of dust, grease and various other small fragments within the air conditioning unit itself. Without the filter, all the dust and particles that are trapped by the filter would be transferred straight onto the fins, leading to that space becoming clogged up, and shut. When the air flow is limited around the cooling area, the system is simply unable to produce cold air. In addition, without the air conditioning filter, the particles and dust would stick to the fins as they are moist due to the moisture produced in the cooling process, especially in humid climates. This can and will cause bacteria development in the system, that in turn, blows this bacteria back into the air that you are breathing in.
Cleaning the window air conditioning filter regularly not only helps with cooling, but additionally helps with the efficiency of the system. A good idea is to clean the filter before turning on the air conditioning unit in the spring, and then again every 3 to four weeks while the system is being utilized. If you reside in a location where there is a great deal of fine dust, smokers in the house might find that cleansing the air conditioning filter every two weeks is also more beneficial.
Window air conditioning filters are the simplest to clean and are generally made of either a strong foam kind of material or a fine mesh. The most typical and advised kind of filter is made of polypropylene, which is actually electrostatic and will trap small particles Air Conditioning Services Dallas TX . To clean these sorts of mesh screens, just clean in warm soapy water and rinse well. Always permit the filter to totally dry before putting it back in the unit. Foam filters should be changed with a brand-new filter that can be made in your home from foam sheets purchased at a home supply store.
A big outdoor standard air conditioning filter can be cleansed with commercial solutions, nonetheless, they commonly are not as effective after they have been cleansed. A much better choice is to simply get rid of and replace the big filters every two months of use. Brush the fins of the outside unit that are located behind the filters and get rid of all particles and dust either by blowing with compressed air or making use of a shop vacuum. Always keep the area around the outside unit free from long grass, shrubs or vines that might obstruct air flow or add particles into the unit or filter.